BASIC TECHNOLOGY EXAM QUESTIONS FOR JSS1 SECOND TERM

SECOND TERM JSS1 BASIC TECHNOLOGY  EXAMINATION QUESTIONS – EDUDELIGHT.COM

Examination malpractices may lead to a repeat of the subject or suspensions don’t be involved.

 Subject: BASIC TECHNOLOGY            

  Duration: 2HR                   

Class: JSS 1

OBJECTIVE     

1.         _______ is any types of structure that has a roof and walls (a) Bus (b) Building (c) Lorry (d) Car

2.         _________ is the type of house built completely on one level (e.g. ground) (a) Bungallow

      (b) Semi-detached (c) Hut (d) High – rise

3.         __________ is used as the binding agent in concrete, block moulding and plastering (a) Cement

         (b) Ceramic (c) Petal (d) Sand

4.         __________ is used as the drawing horizontal lines and supporting set squares (a) Drawing

             board (b) Tee Square (c) Protractor (d) French curve

5.         The tee square consists of two parts namely the stock and _________ (a) The saw (a) The blade

           (c) The top (d) The bottom

6.         We have 30^o – 60 ^o   set square and _________ (a) 45^o set square (b) 15^o set square

            (c) 50^o set square (d) 100^o set square

7.         The protector is used to measure angle between O and _______ (a) 32^o (b) 180^o (c) 90o (d) 30^o   

8.         French curves are used to draw ____ curved lines (a) Regular (b) Straight (c) Irregular (d) Circle

9.         ____________ is used to transfer measurement from one past of the drawing to another

           (a) Divides (b) Compass (c) Protractor (d) Steel rule

10.       __________ is drawn to identify drawing (a) Title block (b) Box (c) Circle (d) Rectangles

11.       ___________ contains name, school, class and date (a) Title block (b) Title book (c) Box name

          (d) Box school

12.       The following are products of technology found in schools except (a) Calculator (b) Bench vice

            (c) Computer (d) Bulldozer

13.       Mixture of sand, cement, gravel with water is called (a) Concrete (b) Alloy (c) Gum (d) Ceramics

14.       This is used for beautification of houses (a) Ceramics (b) Calendar (c) Curtin (d) Wall Clock

15.       __________ can be defined as a room or building in which things are made repaired

            and maintained   a) workshop        b) sitting room              c) house      d) workshop layout

16.       _______________ is the measure taken in the workshop to prevent danger and injury 

            (a) accident    (b) safety        (c) sewing     (d) tiles on the floor

17.       The following are the operation performed in the workshop except   (a) construction         

               (b) repair       (c) maintenance      (d) surgery

18.       Wood can be classified into ________ and ______  (a) hard and wet wood ( b) soft and wet

            (c) Hard and softwood (d) Cheap and expensive wood

19.       ______ are called deciduous wood (a) Softwood (b) Wet wood (c) Hard wood (d) Cheap wood

20.       _________ wood is heavy in weight (a) Hardwood (b) Softwood (c) Fast wood (d) Cheap wood

21.       __________ are iron buckets painted red and loaded with sand for putting out small fire

             (a) Sand bucket (b) Chemical buckets (c) Alarm bucket (d) Blanket bucket

22.       ___________ can be defined as a technical language used for describing things with the aid of

            drawing (a) Technical drawing (b) Drawing materials (c) drawing instrument (d) Drawing board

23.       ___________ is obtained when two or more different metals are mixed together (a) Alloy

            (b) Ferrous (c) Non – Ferrous (d) Rubber

24.       _________ is used for determining angle at various degrees. (a) Protector (b) steel rule

             (c) Steel lapel (d) Caliper

25.       _________ is when ceramics easily break (a) Heal resistant (b) Brittleness (c) Break resistance

            (d) Inorganic material

26.       Hacksaw is used to cut _______________ (a) wood (b) Concrete (c) Metal (d) Plastic

27.       This is used for planning rough wood (a) Rip Saw (b) Jack plane (c) Force plane (d) Tee  Square

28.       Who is a Pedestrian? (a) A Driver (b) Cyclist (c) Athlete (d) Somebody walking along the road or

             street

29.       In order to prevent an accident, a motorist must use the following except (a) driving mirror (b)

           Cell phone (c) Seat belt (d) Obey speed limit

30.       The table on which wood worker perform their operation is called (a) workbench (b) Bench box

            (c) workshop table (d) Construction table 

SECOND TERM JSS1 BASIC TECHNOLOGY  EXAMINATION QUESTIONS – EDUDELIGHT.COM

THEORY

Answer only Three Question

1a  Mention Five different types of building materials and explain their uses

b  Explain two ways we can care for our drawing board

c  Sketch tee- Square and label the parts

2a  Draw and explain the uses of the following drawing instrument

I  Set square     ii  Protractor     iii  Divider      iv  Compass    v  French curve

B  Sketch five workshop hand tools with freehand sketching

3a  Explain the function of wood work bench

b““Explain the following in workbench

(i)  bench vice (ii) bench stop (iii) beach well (iv) tool rack

i  Sketch G- clamp and F- clamp

4 Explain two properties of each of the following materials

i wood     ii Plastics     iii Rubber   iv Metals     v Ceramics

B Explain the uses of following safety devices in the workshop

i Helmet    ii Hand gloves    iii Overalls     iv Safety boot    v Dark goggle

5a Differentiate between natural rubber and synthetic rubber

b Differentiate between ferrous metals and non – ferrous metals

c Differentiate between thermosetting plastics and thermo set

d Differentiate between hardwood and soft wood  

BASIC TECHNOLOGY EXAM QUESTIONS FOR JSS1 SECOND TERM