BASIC TECHNOLOGY EXAM QUESTIONS FOR JSS2 FIRST TERM

FIRST TERM JSS2 BASIC TECHNOLOGY EXAMINATION QUESTIONS – EDUDELIGHT.COM

FIRST TERM EXAMINATION

Examination malpractices may lead to a repeat of the subject or suspensions don’t be involved.

SUBJECT: BASIC TECHNOLOGY      TIME: 1HR 30MINS CLASS: JSS 2

OBJECTIVE QUESTIONS

1. The simple medical treatment given to somebody before the arriver of the medical personnel is called
2. Rescue operation (b) First aid (c) safety guideline (d) safety protection
3. Where the materials needed for First aid care are stored is called
4. Cotton board (b) metal box (c) First aid box (d) plastic box
5. First aid and can be used to care for the following except (a) accident (b) injury (c) headache (d) blood donation
6. ……………………..can be defined as an operation organized to free from danger
7. Rescue operation (b) caring operation  (c) First aid operation (d) responsive operation
8. The pair of compass is used for drawing (a) vertical and inclined (b) irregular curves  (c) horizontal (D) Arcs and circular lines
9. In paper making industry …………………………………… is for producing books
10. Iron Ore (b). Ceramic         (c) Latex     (d) Wood
11. …………………………… metal contain iron (a) alloy (b)  ceramic  (c) ferrous (d) latex
12. ………………. Metals  are magnetic (a) Nonferrous (b) ferrous (c) latex (d) synthetic
13. We have …………………………. Types of plastics (a) five (b) two  (c) three (d)  four
14. Clay mud and cement is used to produce ………………………… (a) Iron ore  (b) latex (c) synthetic  (d) ceramic
15. A process of enlarging or reducing the size of drawing is known as …………………………… (a) freehand sketching  (b) Isometric drawing (c) orthographic drawing (d) scale drawing
16. Which of these can be used to draw vertical and inclined lines (a) protractor (b)  set square (c) divider (d) compass
17. ……… are used for transferring measurement (a) compass (b) French curve (c) scale rule  (d) divider   

14. ………………………….. Is used for determining angles at various degrees (a) divider (b) compass (c) protractor       (d) mallet

15. ……. Is when ceramic and glass easily break (a) brittleness (b) resistant (c) corrosion (d) conductivity

16. Hacksaw is used to cut (a) metal (b) plastics (c) ceramic (d) wood

17. The bench on which wood worker perform all his operation is called …………………………..  (a) Workbench (b) work table (c) wooden table (d) anvil

18. …………………………… has metal head and wooden handle and used to drive nails (a) punch (b) chisel (c) hammer (d) jackplane

19. …….. are called deciduous wood (a) softwood (b) hard wood (c) dry wood (d) wetwood

20. …………………………… are called coniferous wood (a) wet wood (b) dry wood (c) cheap wood (d) soft wood

21. …………………………. Is used to set drawing paper squarely on the drawing board (a) set square (b)T square (c) protractor (d) French curie

22. The following are the instruments used for drawing except (a) drawing board (b) protractor (c) square (d) eraser

23. ……………………….is drawn at the bottom right hand corner of the drawing paper (a) figures (b) lettering (c) title block (d) objects

24. ………………………..Can be defined as the state of being save and protected from danger in the workshop (a) technology (b) operation (c) devices (d) workshop safety

25. ………………………… Can be defined as a room or building in which things are made, repaired and maintained (a) sitting room (b) living house (c) workshop (d) store

26. The following are products of technology find at home except (a) radio (b) television (c) CD player (d) maker board

27. Natural resources such as oil, forest are provided by ………. (a) Nature (b) mankind (c) factory (d) human

 28. Workshop accident include the following except (a) fracture (b) wound (c) bleeding (d) high blood pressure

29. ………………………….care be defined as unpleasant occurrence that occurs unexpectedly and cause injury (a) first aid (b) rescue operation (c) first aider (d) accident

30. Factors responsible for workshop accident include the following except (a) faulty tools (b) tiredness (c) carelessness (d) seriousness       

31. Preventive maintenance include the following except (a) inspection (b) lubrication (c) adjustment (d) repair

32. Ohm is the unit used for measuring (a) resistance (b) voltage (c) current (d) frequency

33. Which of the following is not a tool used on site preparation (a) cutlass (b) hoe (c) axe (d) G clamp

34.  Angle that is less than  90⁰  is called (a) reflex  (b) above   (c) acute  (d) right angle

35. All the following are methods of joining metals except (a) welding (b) soldering (c) riveting (d) gluing  

36. …………is the free flow of electrons in a conductor (a) current (b) latex (c) synthetic (d) ceramic

Fill in the gap (37-40)

37. We have ………………………………….. Types of plastics

38. We have …………………………………. Types of wood

39. We have…………………………………… Types of metals

40. Hard wood can also be called …………………………………. Wood.

THEORY: Answer only three question

Question three (3) is compulsory

1a. Differentiate between first aid and rescue operation

(b) Explain two aspect of rescue operation.

(c) Mention five materials that is needed in a first aid box

2a explain five uses of wood and five uses of metals.

(b) State two properties of hard wood and soft wood

(c) Mention five products of ceramic

3. Construct the following angles. (i) Angles 90⁰ and 45⁰ (AB= 50mm) (ii) angle 60⁰, 30 and 15⁰ (AB = 60mm)

4. Draw and explain  the uses of  five workshop hand tools

5a. explain the following electrical features

• Current  (ii)     voltage                 (iii)    resistance

(b) Draw two drawing instruments and explain the uses.                   

FIRST TERM JSS2 BASIC TECHNOLOGY EXAMINATION QUESTIONS – EDUDELIGHT.COM

BASIC TECH

1.            What rescue operation is right for someone trapped in a vault? (a) cave rescue (b) confined space rescue (c) surface-water rescue (d) ASR

2.            What do we call the rescue of people trapped in a collapsed building? (a) CSAR (b) mine rescue (c) urban search and rescue (d) confined space rescue

3.                           is used to extricate individuals from wrecked vehicles (a) Helicopters (b) Rescue dogs

(c) Ambulance (d) Hydraulic cutting and spreading tools

4.            Which of the following does not require rescue operations (a) collapsed building (b) fire outbreak (c) phone calls(d) natural disasters

5.            is the coordinated search and rescue of emergency water landings as well as people

who have survived shipwreck or boat mishap (a) ASR (b) CSAR (c) Cave rescue (d) RRS

6.            Identify this line.              (a) thin continuous line (b) ruled zigzag line (c) arrow head line. (d) short dashes.

7.            The type of line used in showing visible outline is (a) thin continuous line (b) thick continuous line (c) thin ruled zigzag line (d)thick continuous wavy line.

8.            The shortest distance between two  points is     (a) curve (b) straight line (c) crooked line (d) parallel line

9.            Which of the following is not a property of a line? (a)It has position and length (b)It has  width and thickness (c)It has virtually no thickness (d) It may be a straight line or curved line.

10.          The line that is used in showing hidden details is               (a) thin continuous (b) thick continuous (c) arrow hand (d) short dashes

11.          The angle that FC makes when constructed perpendicular with line AB is              (a) 1800 (b) 2700 (c) 900 (d) 1200

12.          The line FC is called         (a) vertical (b) perpendicular (c) Horizontal (d) incline

13.          Which of the following drawing materials cannot be used to construct a straight line? (a) Compass (b) protractor (c) Ruler (d) pencils

14.          Angles that sum up to 1800  is called        (a) supplementary (b) complementary (c) Reflex (d) obtuse

15.          The line for all visible outlines is called    (a) Thin continuous line (b) Thick continuous line (c) short dashes (d) Zig – Zag lines.

16.          Which of the following triangles has all its sides equal? (a) Equilateral (b) Scalene (c) Isosceles (d) Right-angled

17.          Which of the following triangles has none of its side equal? (a) Equilateral (b) Scalene (c) Isosceles (d) Right-angled

18.          Which of the following triangles has all two sides equal? (a) Equilateral (b) Scalene (c)

Isosceles (d) Right-angled

19.          What is the center rule formula used to construct a polygon as well as dividing a circle into equal parts? (a) 360 – N (b) 360 x N (c) 360/ N (d) 360 + N

20.          The perpendicular distance from the vertex to the base of triangles is called       (a) vetoed

(b) Aptitude (c) Altitude (d) Interior

21.          The part of the circle that is bounded by an arc or cord is (a) segment (b) sector (c) diameter

(d) tangent.

22.          A straight line drawn through the centre, meeting the circumference at both ends is called (a) sector (b)radius (c) diameter (d) tangent

23.          A plane figure bounded by a curved line called circumference is called——-(a) triangle (b) circle (c) quadrilaterals (d) curved line

24.          Any straight line drawn across the circle, meeting the circumference at both ends is called (a) chord (b) tangent (c) radius (d) diameter

25.          Which of the following can be used to draw a circle? (a) protractor (b) French curve (c) compass (d) template

26.          Hardware examples includes the following except          

(A)          Monitor (B) mouse (C) operating system (D) keyboard

27.          F.M Means        

28.          One of these is an example of analogue signal/device

                a.            Computer system (B) human voice (C) dvd player (D) plasma tv

29.                          The demerits of the internet includes these except        

                a.            Access to library (B) pornography (C) cybercrime (D) fraud

30.                          Ferrous metal are metal which contains               

                a.            Cupper (B) iron (C) carbon (D) silicon

31.                          The basic material for the production of ceramics is        

                a.            Clay (B) humidity (C) resuscitation (D) temperature

32.                          A.M Means       

33.                          Tyres is made from        

                a.            Ceramic (B) rubbers (C) metals (D) wood

34.                          G.S.M Stands for             

                a.                          

35.                                         is the degree of hotness or coldness of a body or place

                a.            Pressure (B) humidity (C) resuscitation (D) temperature

36.                          The following are software except          

                a.            (A)Cedar (B) pine (C) iroko (D) spruce

37.                          The letter “S” in S.I.M Stand for                

                a.            Server (B) subscriber (C) system (D) source

38.                          Bronze is an alloy of        and copper

                a.            Tin (B) zine (C) sliver (D) aluminum

39.                          Ceramics have been used for ages in     

                a.            Law (B) medicine (C) sculpture (D) politics

40.                          Gentian violet is               in colour

                a.            Red (B) yellow (C) white (D) purple

THEORY A

1.            Draw a circle of radius 35mm and divide it into 12 equal sizes.

2.            Draw a circle and with shaded portion show (i) quadrant (ii) sector (iii) segment inside the circle.

THEORY B

1.            Construct a rectangle of length 7cm and breadth 5cm with the aid of compass and ruler.

2.            Construct a square with diagonal 5cm.

THEORY C

1.            (a) Define a line.

(a)          Draw a line AB of 60mm and divide the line into 8 equal parts. Draw line AB equals to 10cm and divide into proportions

THEORY D

1.            (a) What are rescue operations?

(b)          Explain “Vehicle extrication”

2.            State the function of the following in rescue operations:

(a)          rescue dogs (b) ambulance

BASIC TECH EXAM QUESTIONS FOR JSS2 FIRST TERM